Learn what’s wrong with your Toshiba laptop’s charger and how to fix it if it’s not working.

Without the charger, you wouldn’t be able to finish your regular tasks because the charger is the laptop’s oxygen source. However, the charger or the laptop’s charging capabilities could stop working due to an accident or carelessness. If that’s the situation and your laptop charger is completely unresponsive, keep reading because we’ll cover every solution imaginable.

Part 1: My laptop is connected, but it isn’t charging.

The moment you connect the charger to your laptop, either a specific LED built inside the device will light up or you will hear a beeping sound. There could be a variety of reasons why the laptop does not charge even after being plugged in if that does not occur. Here are a few illustrations:

  • It’s possible that the laptop isn’t receiving enough power due to a broken charger adapter cord.
  • Both the battery and the charger are old.
  • an issue with the computer’s power supply; an outdated driver for the battery.

Part 2: 4 Solutions to the Toshiba Laptop Charger Problem

The four straightforward fixes described below can help in resolving the issue and getting your laptop’s battery up and charging in no time, regardless of whether the issue is caused by hardware or software:

  • Resolve hardware problems;
  • Restart your computer;
  • Reinstall the battery driver;
  • Refresh your BIOS
  1. Fixing Hardware Problems

The following techniques might be used to investigate different hardware problems that can be the root of the charger’s malfunction:

  • To see if it charges, connect the Toshiba Service Center near me , and the Toshiba laptop charger to different outlets in the room where you are using the computer. If so, there is a problem with the electrical plug in your room. Look into any potential issues with the power cables.
  • Please take the laptop battery out of its compartment and reattach it when the minuter has run out. Check to see if the charging LED on the laptop illuminates after connecting the charger.
  1. Start your laptop again:

Restarting the laptop usually solves most issues. The power reset gives the device a tune-up when necessary. To hard reset your laptop, follow these steps:

  • Remove the battery once the laptop has been put to sleep;
  • Your laptop’s power button should be held down for 30 seconds before being released;
  • Restart your laptop after replacing the battery in the device’s compartment;
  • Check to determine if the computer is charging while simultaneously connecting the charger.
  1. Update your battery driver. 

A recent Windows 10 update may have hampered the battery’s recognition of the charger. The battery’s driver is mostly to blame because it is either out of date or incompatible with the most recent Windows upgrade. By utilizing Windows Device Manager to update the battery’s driver, you can fix the problem, as seen below:

  • In the Windows search box, type “Device Manager”;
  • Locate “Batteries” in the list and double-click it;
  • Right-click on the driver for your battery and choose “Update Driver” before continuing.
  • By choosing “Search automatically for updated driver software,” you can automate the interface’s tasks.
  • To check if the driver has been updated, please wait a short while before closing the window and restarting your laptop.

How to Use Recoverit to Retrieve Lost Data from a Toshiba Laptop:

It was mentioned in the part before that updating the BIOS can cause data loss. Fortunately, Recoverit Data Recovery software’s wide range of distinctive qualities, which are given below, enable it to recover files from any circumstance:

Step 1: Choose a Location

Open the program on your laptop, then select any folder from the interface to recover data from. Next, select “Start.” If you are not able to solve your problems regarding this, don’t worry. You can visit a Toshiba Service Center Near you in the USA and get all the information you need.

Step 2: Scan the Area.

The recovery scan will start when you press the start button. You must wait a few minutes for it to finish. The volume of lost data affects how long the scan will take. You can pause or interrupt the scanning process in Recoverit’s user interface to keep tabs on the recovery of your data. When the scan is done, you will receive a notification.

Step 3: Review and File Recovery

The “preview” portion of Recoverit allows you to examine the files and confirm their validity. When you are satisfied with the outcomes, carefully select the data you wish to recover and select “Recover” to save the files that were successfully recovered.


Before entirely failing to do their jobs, the battery and charger will offer you some warning of a problem. It is advised that the battery and charger be checked frequently in order to prevent such issues.